Skip to content

Why Is My Salt Lamp Turning White?

Imagine walking into your cozy living room. Your favorite salt lamp gives off a warm, soft glow. But wait, is that a white spot on top of it?

Maybe you’re not sure why your salt lamp is turning white if you like these trendy home decor items. Let’s look into this more closely and find out why it’s happening.

So, why is my salt lamp turning white?

A salt lamp can turn white due to a few reasons:

  • Salt Residue Build-up: A salt lamp can turn white when there’s a build-up of salt residue on the top surface. When the lamp’s heat dries out the moisture, it leaves a layer of salt residue behind.
  • Light Absorption: Due to the high levels of salt used in lamps, they can slowly over time lose their color and turn to a white hue. This is due to the salt itself and the light shining on it. The salt will slowly absorb light, which will cause the lamp to gradually turn white.
  • Recrystallization: It is normal for the salt lamp to accumulate a white layer on top due to the release of water and the breakage of ionic bonds. The salt thickness in this white layer is due to a change of its form or recrystallization.
  • Moisture Evaporation: When the water that the salt lamp traps evaporate, naturally, the ionic bonds that remain will leave a crusty residue that may be described as salt or calcium. When these accumulate on the surface, however, it causes the salt lamp to appear white in color.

By following these simple steps and taking proper care of your salt lamp, you can continue to enjoy its soothing glow without any unsightly marks. So don’t let a little white discoloration stop you from basking in the warm ambiance of these popular home decor pieces.

Installation Instructions: How to Assemble Your Himalayan Salt Lamp

Step Action
1 Acquire an authentic lamp from a reputable seller that provides a certificate of authenticity.
2 Place your salt lamp in a dry area away from sources of moisture.
3 Ensure the recommended wattage is used for your specific salt lamp, typically around 15 watts.
4 Regularly clean and maintain your salt lamp by wiping it down with a damp cloth or soft brush.
5 Turn off your salt lamp when not in use to prevent excess moisture build-up.

Top 5 Do Not Do’s for Your Salt Lamp

When it comes to your salt lamp, there are certain actions and practices that you should avoid in order to maintain its natural warm glow and prevent it from turning white. Here are the top 5 things to keep in mind when caring for your salt lamp:

  • Avoid direct sunlight and high humidity: Salt lamps are sensitive to moisture and sunlight, which can cause them to lose their original color. To prevent this, avoid placing your lamp in areas with direct sunlight or high levels of humidity for extended periods of time.
  • Do not submerge in water: Salt lamps are made of salt crystals that can easily dissolve when exposed to water. For this reason, it is important to never submerge your lamp in water as it can cause irreversible damage. Instead, use a damp cloth or mild soap and water solution for cleaning.
  • Stay away from harsh cleaning products: It is best to avoid using harsh chemical cleaners on your salt lamp as they can damage the crystals and cause them to lose their color. Stick to using a damp cloth or mild soap and water solution for cleaning.
  • Don’t overheat: Leaving your salt lamp on for long periods of time can cause it to overheat and potentially turn white. To prevent this, make sure to unplug your lamp when not in use.
  • Regularly clean: To maintain the natural warm glow of your salt lamp and prevent mineral build-up, it is important to regularly clean it with a damp cloth or mild soap and water solution. Neglecting this can lead to a dull appearance or even discoloration over time.
Also Read:  Will Agreeable Gray Be Too Dark?

By following these top 5 do’s for your salt lamp, you can ensure that it continues to radiate its warm pink glow and adds a beautiful touch to your home decor.

Drying Excess Moisture From a Leaking Salt Lamp

Preventing a salt lamp from turning white due to excess moisture is crucial. Leaks can occur, leading to the buildup of salt residue and causing the lamp’s surface to turn white. To effectively dry excess moisture from a leaking salt lamp, follow these steps:

  • Inspect for cracks or damage: Regularly check your salt lamp for any cracks or damage that may cause leaks. If any are found, promptly repair or replace the lamp to avoid further leakage.
  • Clean regularly: Dirt and other materials can contribute to leaks in your salt lamp. To prevent this, regularly clean the lamp’s surface with a damp cloth. This will also help remove any excess moisture present.
  • Seal exposed surfaces: Salt lamps are porous and can absorb moisture from the air. To prevent this, seal any exposed surfaces with beeswax or paraffin wax. This will keep moisture out and prevent leaks.
  • Avoid moisture and extreme temperatures: Place your salt lamp in a dry area away from sources of moisture such as sinks, showers, or humidifiers. Additionally, avoid placing the lamp near heat sources or in direct sunlight, as extreme temperatures can cause cracking and leaks.
  • Store properly: When not in use, store your salt lamp in a dry place to extend its lifespan and prevent potential leaks.
  • Use quality supplies: When cleaning or sealing your salt lamp, be sure to use high-quality supplies to ensure proper protection and prevent leaks.

By following these tips, you can effectively dry excess moisture from a leaking salt lamp and prevent it from turning white.

How to Clean Your Salt Lamp

Cleaning your Himalayan salt lamp is a simple process. Here are the steps you can follow:

  • Turn Off and Cool Down: Always make sure the lamp is turned off and completely cool before cleaning.
  • Remove the Light Bulb: Unplug it from the electrical outlet, and remove the light bulb. This ensures you can safely clean your lamp without any danger of electrocution.
  • Choose the Right Cleaning Cloth: Choose a soft, dry cloth to clean your lamp. Keep in mind that your lamp has a rough and uneven surface. Avoid using a cloth that has lint or a material that is easily snagged.
  • Dab Cloth, Don’t Rub: When cleaning your Himalayan salt lamp, the tendency may be to rub it with the cloth. Instead of rubbing the lamp, dab the cloth over surfaces to ensure you don’t dislodge pieces and end up chipping away chunks of salt.
  • Use a Damp Cloth If Necessary: If you can’t remove the dust and debris with a dry cloth, you may try a damp cloth. Wring out the cloth really well so it is only slightly damp. Then, dab at dust and debris to clean it from your lamp.
  • Dry Immediately: After cleaning, dry your salt lamp thoroughly with a dry cloth and let it sit for a few hours before using it again.
  • Return Light Bulb, Plug In, and Turn On: Once you’ve dusted and cleaned your lamp, you can return the light bulb, plug in your lamp, and continue to use it.

Your Lamp is Flickering or Fused, Now What?

Salt lamps have the potential to turn white as a result of accumulating salt residue or excessive moisture.

To resolve this problem, unplug the lamp and leave it to rest for a few hours. Afterward, wipe it down with a damp cloth and allow it to naturally dry.

In such cases, it is advisable to let the lamp cool down before replacing the bulb or seeking assistance from a professional.

What to do If Your Lamp Becomes Wet

If you want to avoid your salt lamp turning white, adhere to these instructions:

Immediately unplug the lamp

If you happen to notice that your salt lamp has become wet, the first step is to unplug it from its power source.

This will prevent any further moisture build-up and potential harm.

Allow the lamp to sit and evaporate

Let the lamp sit for a few hours, allowing any existing moisture to evaporate.

Also Read:  Why Is Top Outlet Not Working But The Bottom Is?

This will make it easier to remove any residue that may have formed on its surface.

Gently wipe away any salt residue

Using a dry cloth, gently wipe away any visible salt residue from the surface of the lamp. This will help restore its natural pinkish hue.

Why Is My Salt Lamp Turning White-2

Dampen the cloth and continue wiping

Dampen the cloth slightly and continue wiping in circular motions to remove any remaining residue. Be thorough in this step to ensure all traces of moisture and salt are eliminated from the surface.

Completely air dry the lamp

Allow the lamp to air dry completely before plugging it back in. This will prevent any potential damage to the bulb or electrical components.

Consider swapping for a lighter bulb

If your salt lamp continues to turn white, consider using a lighter bulb as excess heat from the bulb can contribute to moisture retention and salt residue build-up.

Regularly clean the surface

Make it a habit to regularly wipe down the surface of your salt lamp with a damp cloth to prevent build-up and maintain its natural color.

By following these steps, you can keep your salt lamp looking beautiful and glowing with its warm orange hue.

The Proper Way to Store Away Your Lamp (Long-term)

Proper storage of your salt lamp is crucial in preventing it from losing its vibrant hue. Follow these steps to ensure that your salt lamp maintains its natural, colorful appearance for the long haul.

  • Disconnect and let it rest: When not in use, always disconnect your salt lamp to avoid any moisture accumulation. In case your lamp does come into contact with water, immediately unplug it and let it sit for a few hours to allow any existing moisture to evaporate.
  • Wipe off moisture: After letting the lamp sit, use a dry cloth to wipe away any moisture on the surface. This will prevent any salt residue from forming.
  • Gently dampen and wipe: Dampen a cloth with water and gently wipe away the top layer of salt residue. Make sure not to use excessive water, as this may make it harder to remove the underlying pinkish hue.
  • Let it air dry: Allow the lamp to air dry completely before plugging it back in. This will prevent any extra moisture from causing salt residue.
  • Consider using a lower watt bulb: If your salt lamp continues to turn white, try replacing the bulb with one of a lower wattage. This will generate less heat and help prevent moisture build-up.
  • Regularly maintain: To maintain the natural color of your salt lamp, regularly clean the surface with a slightly damp cloth. This will prevent any salt residue from accumulating over time.

By properly storing and taking care of your salt lamp, you can enjoy its warm, orange glow without worrying about it turning white.

Top 3 Pro-Tips Every Himalayan Salt Lamp Owner MUST Know.

The first tip is to ensure that your salt lamp is placed in a dry area. This is because moisture can cause the salt lamp to dissolve or develop a white film on its surface. To avoid this, it is best to keep your salt lamp away from humid areas like bathrooms or kitchens. Salt lamps are hygroscopic, meaning they absorb moisture from their surroundings.

The second pro-tip is to regularly clean and maintain your salt lamp. Over time, dust and dirt can accumulate on the surface, creating a white film. To keep your salt lamp looking pristine, make sure to wipe it down with a damp cloth on a regular basis. Remember to dry it thoroughly before plugging it back in to prevent any moisture buildup.

Lastly, make sure to use your salt lamp frequently. The heat from the light bulb inside helps to evaporate any absorbed moisture. By using your salt lamp for at least six hours daily, you not only maintain its effectiveness but also release negative ions that are believed to have health benefits.


For those who love the unique look of Himalayan salt lamps, seeing a white film form on their surface may come as a surprise.

This might happen because of moisture in the air or because the lamp’s salt wasn’t very good. You can, however, avoid and get rid of this problem by following a few simple steps.

Also Read:  How To Protect TV From Fireplace Heat?

Cleaning your lamp often, keeping it away from places with a lot of humidity, and using a dryer if you need to are all good things you can do. Putting your lamp together and storing it correctly can also help it keep its original color.

These tips will help your salt lamp look its best, so a little white dust won’t take away from its soothing glow.


Josefa R. Hoyle, the creative force behind Grace Built Home Improvement, is a seasoned in-house writing specialist with over 15 years of expertise. Armed with a Ph.D. in Creative Writing from the University of Louisiana, she is renowned for her unparalleled skill in crafting top-tier content within the realm of home improvement.